FACELIFT.STUDIO

Comparison of the rheological properties of viscosity and elasticity in two categories of soft tissue fillers: calcium hydroxylapatite and hyaluronic acid

Lab measurement of the thickness and stiffness of seven facial fillers showed that current fillers fall into three groups, which the authors say helps predict whether a filler will lift, support or sculpt.

2010
Dermatol Surg
178
Citations, NIH iCite
4
Authors
1
Topics

Overview

Two common types of facial filler are made mainly of calcium hydroxylapatite (CaHA) or cross-linked hyaluronic acid (HA). The authors wanted to give physicians a scientific basis for choosing fillers for volume replacement. They measured the viscosity and elasticity of seven filler gels in a lab instrument called a rheometer.

Findings

  • Fillers tested: six cross-linked HA fillers (Restylane, Perlane, Restylane SubQ, Juvéderm Ultra, Juvéderm Ultra Plus, Juvéderm Voluma) and one CaHA filler (Radiesse).
  • Viscosity and elasticity were measured by oscillation on a Thermo Haake RS600 rheometer, plate and plate geometry, 1.2 mm gap, 35 mm titanium sensor, 30°C.
  • Measurements at 5 pascal over 0.1 to 10 Hz, read at 0.7 Hz, chosen as the most reproducible and relevant to stresses common in skin.
  • The measurements support dividing current fillers into three groups.
  • The abstract does not name which filler falls in which group or give the measured values.

What it means for a patient

  • Fillers differ in how thick and stiff they are, and these properties affect how they behave after injection.
  • Your injector can choose a filler to lift, support or shape an area based on these properties.
  • This is a lab study of the gels themselves. It does not test results in patients.
  • Ask which filler is planned for each area and why.

Why this paper matters

It gave a lab-based way to classify fillers by viscosity and elasticity. The authors state this lets clinicians choose fillers on scientific grounds and predict how they will lift, support and sculpt. Cited 178 times (NIH iCite, 2026-09-25).

Terms

  • Rheology: the study of how materials flow and deform.
  • Viscosity: how thick a gel is and how much it resists flowing.
  • Elasticity: how well a gel springs back after being pressed; stiffness.
  • Calcium hydroxylapatite (CaHA): mineral microspheres in a gel, used as a filler.
  • Cross-linked hyaluronic acid (HA): a gel form of a sugar found in skin, bonded to last longer as a filler.
  • Rheometer: a lab instrument that measures flow and stiffness.
  • Soft tissue filler: an injectable used to add volume under the skin.

Newest papers on fat grafting and volume

From the PubMed facelift record, newest first.

2026
Facelift Surgery in Patients With Prior Dermal Fillers and Energy-Based Device Treatments: Challenges and Strategic Considerations
Cervantes A, O'Daniel G, Auersvald L, Pacifico M, Baptista-Fernandes T, Torres B, et al. · Aesthetic Plast Surg · PMID 42321446
2026
Periorbital Rejuvenation Using Fat Grafting to Five Key Anatomic Areas
Chadab TM, Wiegmann AL, Skochdopole AJ, Rohrich RJ · Plast Reconstr Surg · PMID 42153751

More summaries on fat grafting and volume